Jump to content
  • Welcome to Pages!

    To get started, make sure you are logged in and click the arrow on the left hand side Block Manager to expand the block manager.
    You can move, add and edit blocks without the need for complex coding!

  • How to Bot - AFK Arena



    AFK Arena is a game centered around gaining rewards while idle. However, there is still much to do, such as manage heroes, beat levels, collect rewards, and more. The BotSauce AFK Arena bot is here to take the tedious grinding out of the game, and provide you with high level heroes and rewards! AFK Arena bot provides many features to enhance your game experience and make the game even more enjoyable. 




    For a full list of supported features, click here: 







    Bot Setup


    Step 1 - Select Device to Bot

    Once you open BotSauce, select the device that you want to run the bot on. 


    Make sure that you are running BotSauce as admin because not running in admin CAN cause issues!


    BotSauce v1.023 2_20_2021 8_56_10 PM.png


    Step 2 - Select AFK Arena Bot

    After selecting the device that you want to bot, you will then select "AFK Arena" from the "Select Bot" drop down menu. You should then see the AFK Arena settings panel, like this. 


    BotSauce v1.023 2_20_2021 8_59_45 PM.png



    Step 3 - Enable Activities

    The next step is to enable the activities that you want the bot to perform. To do this, select the "Activities" tab. 

    Here's a short description for each of the activities:

    - Collect AFK Rewards: This will collect AFK rewards every x minutes specified by the user

    - Collect Quest Rewards: This will collect Quest rewards every x minutes specified by the user

    - Send & Receive Friend Hearts: This will send and receive friend hearts every x minutes specified by the user

    - Level Heroes: This will level up and/or equip gear for the specified heroes (described in the next step) every x minutes specified by the user

    - Battle Campaign: This will battle campaign stages every x minutes specified by the user

    - Battle Kings Tower: This will battle kings tower every x minutes specified by the user


    BotSauce v1.023 2_20_2021 8_59_52 PM.png



    Step 4 - Select Heroes to Level and Equip Gear

    If you have enabled the "Level Heroes" activity, you will need to configure which heroes you want to level and equip gear for. To do this, select the "Heroes" tab. From there, select the checkbox for each hero that you want the bot to manage for you. The number of selected heroes will be visible at the top of the heroes list. 


    BotSauce v1.023 2_20_2021 9_00_25 PM.png



    Step 5 - General Configuration

    The last configuration step is the "General" tab. Select this tab to see the remaining settings. Here is a short description of each setting.


    Stop After

    This is a setting that can be enabled to prevent the bot from going if you continue losing over and over, or if you want to stop after a certain number of wins or total battles. You can simply set the numeric value to stop at, and then select a option from the drop down. For example, if you input "5" and select "Losses" then the bot would stop if you lose 5 battles. 


    Attempt Tutorials

    If enabled, the bot will attempt to complete the in game tutorials. Some tutorials are more complex, or require user input. In those cases, the bot may stop, or ask the user for input. However, in general it will handle most in game tutorials. 


    Level Up Presses Per Hero

    This value is how many times the "Level Up" button will be pressed per hero that you have selected for the bot to manage. For example, if you tell the bot to manage "Hogan" ever 30 minutes, and set this value to 5, then every 30 minutes, the bot will press the "Level up" button in game 5 times for Hogan. This is a good setting to allow for user selection on how hard to level up heroes. You can set it to 1 for a light resource expenditure, or a higher value like 20 to dump resources more quickly into heroes. 


    BotSauce v1.023 2_20_2021 9_00_33 PM.png



    Step 6 - Save a Profile

    Now that you configured all of your settings, save them for later! You can easily save a settings profile to load back in later. That way you don't have to keep setting up the same options over and over. To do this, open the "Profiles" tab. In there, enter a "Profile Name" on the right hand side, and then press "Save". 


    Now you should see the saved profile in the left hand side "Load" drop down box. Now in the future, you don't have to set any settings. When you open the bot, simply select the profile from the "Load" drop down box, and then press the "Load" button. All settings will be loaded exactly as you set them. You can save as many profiles as you need, which is especially useful when botting multiple accounts.


    BotSauce v1.023 2_20_2021 9_26_56 PM.png


    Step 7 - Start the Bot

    That's all there is to it, now press the "Start" button and happy botting!





    Useful Links




    • Like 2

    User Feedback

    Recommended Comments

    Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.

    Add a comment...

    ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...